Progress PHN23100X Manual do Utilizador descarregar pdf (Página 19)

Problem Possible cause Remedy

You cannot activate or oper-

ate the oven. The display

shows “400” and an acoustic

signal sounds.

The oven is incorrectly con-

nected to an electrical sup-

ply.

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are

not set.

Make sure that the settings

are correct.

The oven does not heat up. The fuse is released. Make sure that the fuse is the

cause of the malfunction. If

the fuse releases again and

again, contact a qualified

electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation set-

tle on the food and in the

cavity of the oven.

You left the dish in the oven

for too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

The display shows "12.00". There was a power cut. Reset the clock.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre.

The necessary data for the service centre is

on the rating plate. The rating plate is on

the front frame of the appliance cavity. Do

not remove the rating plate from the

appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

INSTALLATION

WARNING! Refer to Safety

chapters.

Progress 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Comentários a estes Manuais

Sem comentários

Progress PHN23100X Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Progress PHN23100X