Progress PHP5325X Manual do Utilizador descarregar pdf (Página 3)

• Internally the appliance becomes hot when in operation. Do

not touch the heating elements that are in the appliance. Al-

ways use oven gloves to remove or put in accessories or

ovenware.

• Do not use a steam cleaner to clean the appliance.

• Before maintenance cut the power supply.

• Do not use harsh abrasive cleaners or sharp metal scrapers

to clean the glass door since they can scratch the surface,

which may result in shattering of the glass.

• Excess spillage must be removed before the pyrolytic clean-

ing. Remove all parts from the oven.

• To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls. In-

stall the shelf supports in the opposite sequence.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• The means for disconnection must be incorporated in the

fixed wiring in accordance with the wiring rules.

• Ensure that the appliance is switched off before replacing

the lamp to avoid the possibility of electric shock.

SAFETY INSTRUCTIONS

Installation

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must

have suitable dimensions.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• Parts of the appliance carry current.

Close the appliance with furniture to pre-

vent touching the dangerous parts.

• The sides of the appliance must stay ad-

jacent to appliances or to units with the

same height.

Electrical connection

Warning! Risk of fire and electrical

shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

progress 3

1 2 3 4 5 6 7 8 ... 31 32

Comentários a estes Manuais

Sem comentários

Progress PHP5325X Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Progress PHP5325X