Progress PHN1220X Manual do Utilizador descarregar pdf (Página 5)

to indicate that the temperature is being

maintained.

Control knobs for hob

The selector knobs for the four hob heating

elements are located on the switch panel.

The hotplates are controlled by a 9- position

switch, from which the following working lev-

els can be used:

–

0 = OFF

–

1 = Minimum

– 9 = Maximum

Dual-circuit switching

(see the list of appliances in the «Tech-

nical Data» chapter)

Switch on both hot rings by turning the cook-

ing zone knobs from level 9 to “

” posi-

tion (clockwise);

There is an audible “click”.

Both heating circuits are now switched on

simultaneously.

You can then set the level you want (turn the

knob anti-clockwise).

Never leave the appliance unsupervised

when preparing food with oil or fat, like chips,

for example, as oil and fat can easily catch

fire if overheated.

Safety thermostat

To prevent dangerous overheating (through

incorrect use of the appliance or defective

components), the oven is fitted with a safety

thermostat, which interrupts the power sup-

ply. The oven switches back on again auto-

matically, when the temperature drops.

Should the safety thermostat trigger due to

incorrect use of the appliance, simply remedy

the error after the oven has cooled down. If,

on the other hand, the thermostat triggers

because of a defective component, please

contact Customer service.

Cooling fan

The oven is equipped with a cooling fan,

which cools the control panel, the operating

knobs and the oven door handle. The cooling

fan is activated automatically when the oven

is in use.

The warm air is blown through the opening

next to the oven door handle.

The cooling fan shuts down when the oven

function switch is in the " 0 " position.

Before first use

Warning! Remove all packaging,

both inside and outside the oven,

before using the oven.

Before the first use, the oven should be heat-

ed while empty.

During this time, an unpleasant odour may be

emitted. This is absolutely normal. It is

caused by manufacturing residues.

Ensure that the kitchen is well ventilated.

1. Turn the oven regulator to Top and bot-

tom heating element

2. Turn the temperature regulator to 250°C.

3. Open a window for ventilation.

4. Allow the oven to run empty for approxi-

mately 45 minutes.

Repeat the procedure for Grill

for about

5-10 minutes.

Once this operation is carried out, let the

oven cool down, then clean the oven cavity

progress 5

1 2 3 4 5 6 7 8 9 10 ... 59 60

Comentários a estes Manuais

Sem comentários