Progress PHD34100X Manual do Utilizador descarregar pdf (Página 25)

Problem Possible cause Remedy

You cannot activate or oper-

ate the oven. The display

shows “400” and an acoustic

signal sounds.

The oven is incorrectly con-

nected to an electrical sup-

ply.

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are

not set.

Make sure that the settings

are correct.

The oven does not heat up. The fuse is released. Make sure that the fuse is the

cause of the malfunction. If

the fuse releases again and

again, contact a qualified

electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation set-

tle on the food and in the

cavity of the oven.

You left the dish in the oven

for too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

The display shows "12.00". There was a power cut. Reset the clock.

There is no good cooking

performance using the True

Fan Cooking PLUS function.

You did not activate the True

Fan Cooking PLUS function.

Refer to "Activating the True

Fan Cooking PLUS function

There is no good cooking

performance using the True

Fan Cooking PLUS function.

You did not fill the cavity em-

bossment with water.

Refer to "Activating the True

Fan Cooking PLUS function

The water in the cavity em-

bossment does not boil.

The temperature is too low. Set the temperature at least

to 110 °C.

Refer to “Hints and tips”

chapter.

The water comes out of the

cavity embossment.

There is too much water in

the cavity embossment.

Deactivate the oven and

make sure that the appliance

is cold. Wipe the water with a

cloth or sponge. Add the cor-

rect amount of water to the

cavity embossment. Refer to

the specific procedure.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre.

The necessary data for the service centre is

on the rating plate. The rating plate is on

the front frame of the appliance cavity. Do

not remove the rating plate from the

appliance cavity.

Progress 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários

Progress PHD34100X Manual do Utilizador Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Progress PHD34100X